Visit us at Roof+Timber in Stuttgart in hall 3, Stand 3.0419

NEW – solves logistic difficulties easily, GEDA Liftbox – a transport box for ideal storage and handling of the GEDA Lift

The new GEDA 200 Z will be shown at Roof+Timber!

On this year's BAUMA a new member of the GEDA product family was presented; the small, lightweight and handy GEDA 200 Z – our ideal hoist for scaffolder and construction workers.

The characteristics small, lightweight and handy describe the new material hoist GEDA 200 Z the best. The lightweight platform (only 44kg) can be turned by 90° to the left and to the right. Load capacity 200 kg, lifting speed 25 m/min, lifting height 35 m. The mast with the toothed rack can be fixed to the scaffold using only one tube. The anchoring distances are 4m.

The entire unit only requires an area of 1.5 x 1.5 m on the ground, which makes it possible to load the hoist parallel to the building without any problems. Unloading at the landing levels can be easily done by turning the platform. The GEDA design and development team has constructed the GEDA 200 Z to be easily serviced and maintained, i.e. easy access to handy components.

The GEDA 200 Z has been designed and constructed with respect to the demands and desires of a lot of customers. It can be used in the following areas:
- renovation of balconies (few materials, but high heights)

- scaffolds on towers (lots of materials from one point)

- flat scaffold constructions/ skyscrapers

Most often, there are economical reasons for using construction hoists. You can spare your materials and save money. Of course, they offer increased safety for people and materials. Quite a lot of companies also use construction hoists to build up a second pillar with renting the machines. Often the architects' service specifications also demand material hoists. There are a lot of reasons for using construction hoists. GEDA is able to offer a wide range of multi-purpose units for height access technology.