Art. No. 01815
Mortar skip 65 l

Art. No. 01816
Brick cage 62 x 32 x 50 cm with pallet

Art. No. 01819
Board lifting frame, adjustable for boards up to 125 cm width

Art. No. 01820
Delivery cage 92 x 57 x 44 cm with pallet

Art. No. 01827
Hook tie for 5 hooks

Art. No. 01860
Scaffold clamp for 1½“ tubular scaffolds

Art. No. 01862
Floor to ceiling tie, telescopic from 230 - 325 cm, swivel arm adjustable in heigth

Art. No. 01863
Tripod, freestanding, with ballast container

Art. No. 01902
Set of balcony clamps (2 pieces), can only be used with fixing frame (for wall thickness up to 40 cm)

Art. No. 01903
Set of chains 200 cm (2 pieces) with carbine swivels - for fixing at the scaffold - to hang up against the wind pressure

Art. No. 01904
Fixing frame - for fixing at the scaffold - to hang up at balcony clamps

Art. No. 01907
Hand winch with 21 m rope

Art. No. 01908
Hand winch with 41 m rope

Art. No. 01909
Dust protection hood to cover the fi lling neck (for Art

Art. No. 01911
Flat roof support with folding parapet protection (three parts, easy to transport)

Art. No. 01913
Dust collar to seal the last (bottom) rubbish chutes

Art. No. 01917
Skip cover 6 x 3 m with collar; sturdy material and design

Art. No. 01918
Deflector ring to defl ect the rubbish chute; with 2 perlon ropes 5 m

Art. No. 01919
Chute liner (2 - 3 pieces recommended for the deflected zone; protects the areas subject to severe impact)

Art. No. 01921
Dump hopper (opening width 60 cm; highly impact resistant plastic)

Art. No. 01922
Chute branch section 0

Art. No. 02205
Assembly arm with hand winch (only with support bar art

Art. No. 02215
Perlon rope 22 m with accessories for assembling

Art. No. 02253
Rigid platform with hinged side walls (inclination of platform adjustable)

Art. No. 02362
Ladder fixing clamps (2 pcs

Art. No. 02364

Art. No. 02506
Ladder section 2 m with toothed rack, cable duct and quick-lock device

Art. No. 02507
Ladder section 1 m with toothed rack, cable duct and quick-lock device

Art. No. 02513
Extension cord 20 m for electric module

Art. No. 02519

Art. No. 02520
Uniaxial trailer 80 km/h, without coupling device, automatic unloading without auxiliary devices

Art. No. 02521

Art. No. 02522

Art. No. 02523
Standard frame for platform (for the transport of scaffold parts)

Art. No. 02528
Special frame for platform (for the transport of scaffold parts)

Art. No. 02537
Adjusting spindle for alignment of the base mast (3 pcs

Art. No. 02539
Trailing cable guide (1 pcs

Art. No. 02560
Cable bin with trailing cable 25 m lifting height (230 V)

Art. No. 02561
Cable bin with trailing cable 50 m lifting height (230 V)

Art. No. 02570
Cable bin with trailing cable 25 m lifting height (400 V)

Art. No. 02571
Cable bin with trailing cable 50 m lifting height (400 V)

Art. No. 02572
Cable bin with trailing cable 75 m lifting height (400 V)

Art. No. 02573
Cable bin with trailing cable 100 m lifting height (400 V)

Art. No. 02625
Access ramp for loading on the ground

Art. No. 02628
Stop bar for landing level stop

Art. No. 02632
Assembly plank for the load platform (small folding platform to anchor the hoist without existing scaffold)

Art. No. 02804
Extension cord 20 m for control unit (5-pin)

Art. No. 02812

Art. No. 02817
Bucket hanger (to fix to general purpose platform)

Art. No. 02818
Tipping skip with tipping attachment (rotatable for unloading on the ground) and adjustable prop (for standard trolley only)

Art. No. 02822
Wheeled undercarriage with wheel relief

Art. No. 02824
Cable drum 33 m, 3 x 2

Art. No. 02826
Roof tie (infinitely adjustable in height from 37 to 60 cm)

Art. No. 02831
Sheet carrier, adjustable for boards 0

Art. No. 02833
Angle tracks section adjustable from 20° to 45°, one short and one long side (operational on both sides)

Art. No. 02837

Art. No. 02855
Tilting trolley with safety brake in case of rope failure

Art. No. 02856
Tipping skip (for tilting trolley only)

Art. No. 02860
Tile holder with liftable protective grating, 1 tile cart and 2 pallets

Art. No. 02862
Front protector for general purpose platform

Art. No. 02875
Extension cord 10 m for electric module

Art. No. 02877
Angle track section infinitely adjustable 20° to 45°

Art. No. 02879
Extension cord 20 m for control unit (7-pin)

Art. No. 02882

Art. No. 02884

Art. No. 02885

Art. No. 02886
Transport axle for the manual transport of the base unit

Art. No. 02888
Ladder section 200/250 kg - 2 m complete with ring nuts

Art. No. 02889
Ladder section 200/250 kg - 1 m complete with ring nuts

Art. No. 02890
Ladder section 200/250 kg - 0

Art. No. 02891
Ladder section 200/250 kg - 0

Art. No. 02893
General purpose platform with hinged side guards

Art. No. 02895
Vario platform with hinged side walls (inclination of platform adjustable)

Art. No. 02906
Modification kit for general purpose platform to make a solar platform with clamping-arm

Art. No. 02907
Bundle (10 pieces) ring nuts with washers and screws

Art. No. 02960
Solar platform with clamping-arm

Art. No. 03066
Rope 5 mm Ø, L = 0

Art. No. 03350
Steel mast 1

Art. No. 03370
Set of mast ties with fixing tubes

Art. No. 03378
Ladder section 150/200 kg - 2 m complete with ring nuts

Art. No. 03379
Ladder section 150/200 kg - 2 m complete with ring nuts

Art. No. 03384
Ladder section 150/200 kg - 0

Art. No. 03385
Ladder section 150/200 kg - 0

Art. No. 03388
Set of mast ties for wall fixing consisting of 2 mast ties and 4 telescopic tubes

Art. No. 03394
Support bar for securing the head section

Art. No. 03396

Art. No. 05643
Ladder prop, telescopic up to 5

Art. No. 05711

Art. No. 07324
Steel wire rope 26 m, 5 mm

Art. No. 07589
Steel wire rope 51 m, 5 mm

Art. No. 08922
Dump hopper (opening width 76 cm)

Art. No. 1002149
Support arm for easy opening of the landing level safety gate "Comfort", "Standard" and "Standard-Basic"

Art. No. 1004542

Art. No. 10061

Art. No. 1033351
Vario+ platform with hinged side walls on all sides (inclination of platform adjustable)

Art. No. 1063860
Jack ring for crane (GEDA VARIO-MAST Square)

Art. No. 1067872
GEDA SVARIO-MAST 1

Art. No. 1073183
Cable bin cover with lock (theft protection)

Art. No. 10733
Steel wire rope 51 m, 4

Art. No. 10736
Steel wire rope 81 m, 4

Art. No. 10970
Manual control with emergency-off button and 10 m cable

Art. No. 1102080
Cable bin cover with lock (theft protection)

Art. No. 1109609

Art. No. 1116964
Safety railing for sliding door of the base enclosure

Art. No. 1123161
Cable channel incl

Art. No. 1127900
Jack ring for crane (GEDA SVARIO-MAST)

Art. No. 11295

Art. No. 1133313
Set of mast tie for fixing on a steel construction

Art. No. 11543
Stop bar for landing level stop

Art. No. 1160050
Cabel channel for laying of the landing level electrics (extendable 1480-2640 mm)

Art. No. 1160078

Art. No. 1160139
Cable channel incl

Art. No. 1175939
Catch hook to stabilize the hoist on the landing level safety gate

Art. No. 1176948
Floor inlay (retrofit kit)

Art. No. 1178167
Adapter for electric module (necessary when using the landing level safety gate “Standard” and “Standard-Basic” with sheet metal panel)

Art. No. 1178167
Adapter for electric module (necessarry, if the slot of the electric module is blocked by railings)

Art. No. 1181212
Support bracket for ramp (attachment on the pit)

Art. No. 1185301
Adapter mast GEDA VARIO-MAST to GEDA SVARIO-MAST

Art. No. 1186117

Art. No. 1186335
Base plates (1700 kg) for foot section

Art. No. 1187049
Increase of the platform height up to 2 m on the C-side (only in connection with roof art

Art. No. 1187352
Set of mast tie (1

Art. No. 1187437
Fixing bolt for ramp (for use with catch hook)

Art. No. 1189257
Attachment set for sliding door (Art

Art. No. 1190062
Drilling jig for landing level safety gate (installed in front of the landing)

Art. No. 1190419
Retrofit kit for unloading ramp necessary for using landing level safety gate "Premium" and "Flexy"

Art. No. 1209924
Trailing cable guide

Art. No. 13001
Standard cartridge (400 g) Grease for EXTREME applications

Art. No. 13051

Art. No. 13456
Standard cartridge (400 g) Grease for MEDIUM applications

Art. No. 13457
Standard cartridge (380 g) Grease for SIMPLE applications

Art. No. 13458
Standard cartridge (400 g) Low temperature grease for MEDIUM and EXTREME applications

Art. No. 13914
Labels "Brake indicator" (set)

Art. No. 16558
Retrofit kit for 2

Art. No. 17457
Double spring for easier opening of the ramps (suitable for short, straight loading ramp and straight unloading ramp)

Art. No. 18722

Art. No. 19066

Art. No. 19390
Trailing cable 25 m lifting height

Art. No. 19391
Trailing cable 50 m lifting height

Art. No. 19392
Trailing cable 75 m lifting height

Art. No. 19393
Trailing cable 100 m lifting height

Art. No. 19397
Connection cable for the use with double mast platform

Art. No. 19485

Art. No. 19486
Set of extension tubes (1,5 m) for mast fixing

Art. No. 19770
Head section with control and support

Art. No. 19867
Crane fixation 12

Art. No. 21410
Hand winch with support (for lifting mast sections during erection)

Art. No. 21604

Art. No. 21607

Art. No. 22270

Art. No. 22286
Refill gun for automatic lubrication system

Art. No. 22287

Art. No. 22927
Control for drop test with 10 m cable, plug-in type

Art. No. 23871

Art. No. 23874
Cable bin with trailing cable 100 m lifting height

Art. No. 24109

Art. No. 24512

Art. No. 26100

Art. No. 26267

Art. No. 27725
Crane fixation 22 cm (M12) 2 pcs

Art. No. 29497
Swivel arm support (can be mounted at any height)

Art. No. 29630
Limit switch operating plate for landing level stop

Art. No. 29650
Assembly plank for the load platform (small folding platform to anchor the hoist without existing scaffold)

Art. No. 29807
Ladder Track fi xing clamps (1 piece for base section and 1 piece every 4 m)

Art. No. 29809
Transport frame for scaffold parts (1½" tubes not supplied)

Art. No. 29819
Wall fixing bracket (only in connection with ladder track fixing clamps)

Art. No. 31050
Trailing cable guide for flat cable

Art. No. 31060
Limit switch operating plate for landing level stop

Art. No. 31850

Art. No. 32970

Art. No. 34318
Crane fixation 19 cm (M12) 2 pcs

Art. No. 36805
Cable bin with trailing cable (flat) for 230 V, 25 m

Art. No. 36806
Cable bin with trailing cable (flat) for 230 V, 50 m

Art. No. 37660
Ramp for front loading 0

Art. No. 37920

Art. No. 38100
Landing level safety gate 2 PK 0

Art. No. 38350
Door for front loading 0

Art. No. 38500
Landing level safety gate "ECO" 0

Art. No. 38951
Cable bin cover with lock (theft protection)

Art. No. 39418
Adapter 300 Z/ZP for uniaxial trailer 01181

Art. No. 39700
Landing level safety gate "ECO +" 1,4 m wide

Art. No. 40081

Art. No. 40888

Art. No. 41163
Floor and wall tie for landing level safety gate 2 pcs

Art. No. 41426
Cable permanent with control (without cable bin)

Art. No. 41441
Height 2

Art. No. 41442
Height 1

Art. No. 41756
Trailing cable guide for flat cable

Art. No. 41805
Cable bin with trailing cable (flat) for 400 V, 25 m

Art. No. 41806
Cable bin with trailing cable (flat) for 400 V, 50 m

Art. No. 42500
Landing level safety gate “ECO S” 0

Art. No. 42610
Aluminium mast 2 m with captive screws and cam for limit-switch (uppermost mast)

Art. No. 43030

Art. No. 43035

Art. No. 43905
Cable permanent with control (without cable bin)

Art. No. 46309
Liftbox 80 cm x 65 cm x 78 cm (LxWxH)

Art. No. 47760

Art. No. 50015
Trailing cable guide for flat cable

Art. No. 50203
Cable bin with trailing cable (flat), 50 m

Art. No. 50211

Art. No. 50220
Transport beams necessarry for storage, transport and installation

Art. No. 50595
Set of mast tie (1

Art. No. 50881
Jack ring for crane load capacity 1700 kg

Art. No. 51064
Landing level safety gate (installed into the landing)

Art. No. 51516
Landing level safety gate (installed in front of the landing)

Art. No. 52104
Bolt down flat roof support

Art. No. 52196
Mounting kit for base plate

Art. No. 52249
Pedestals for landing level safety gate (installed into the landing)

Art. No. 53743
High base enclosure (closed on four sides) 2 m height with sliding door (1

Art. No. 53744
Barrier for base enclosure 1

Art. No. 53745
Sliding door (1

Art. No. 53746
Base enclosure 1

Art. No. 53814

Art. No. 53815

Art. No. 53816

Art. No. 53817

Art. No. 53818

Art. No. 53998
Crane fixation 13-22 cm (M12) 1 pcs

Art. No. 54390

Art. No. 55812

Art. No. 55828
Cable storage (floor) Loose cables lying around are easily damaged in the tough daily life on a building site

Art. No. 55835
Cable storage (roof) The central feeder is used to store half of the cable on the roof during assembly

Art. No. 56021
Ballast weight 25 kg

Art. No. 56260
Stop bar for level stop for GEDA VARIO-MAST

Art. No. 56300
Trailing cable guide for flat cable

Art. No. 56309
Winch with support (for lifting mast sections during erection)

Art. No. 56800
GEDA VARIO-MAST Square Steel mast 1

Art. No. 56956
Additional weight for pulley block (required for 81 m rope length)

Art. No. 60105
Cable bin with trailing cable 75 m lifting height

Art. No. 60110
Load platform collapsible (width of 75 cm)

Art. No. 60853
Manual control "Up-Down-Level-Emergency" with 5 m cable, plug-in type

Art. No. 61114

Art. No. 62995
Electric module "Up-Down-Level-Emergency"

Art. No. 63008
Special cartridge (400 g) Grease for EXTREME applications

Art. No. 63111
Divider for load platform 75 cm (art

Art. No. 63547
Landing pre-selection control with diagnostic system (via display)

Art. No. 63609
Cable set 25 m lifting height

Art. No. 63610
Cable set 50 m lifting height

Art. No. 63611
Cable set 100 m lifting height

Art. No. 63612
Cable set 150 m lifting height

Art. No. 63613
Cable set 200 m lifting height

Art. No. 63614
Cable set 250 m lifting height

Art. No. 63615
Cable set 75 m lifting height

Art. No. 63616
Cable set 125 m lifting height

Art. No. 63617
Cable set 175 m lifting height

Art. No. 63618
Cable set 225 m lifting height

Art. No. 63633
Pre-fitting for „infobric“ access system („infobric“ access system not included)

Art. No. 63649
Cable set 25 m lifting height pluggable

Art. No. 63650
Cable set 50 m lifting height pluggable

Art. No. 63651
Cable set 100 m lifting height pluggable

Art. No. 63652
Cable set 150 m lifting height pluggable

Art. No. 63653
Cable set 200 m lifting height pluggable

Art. No. 63654
Cable set 250 m lifting height pluggable

Art. No. 63655
Cable set 75 m lifting height pluggable

Art. No. 63656
Cable set 125 m lifting height pluggable

Art. No. 63657
Cable set 175 m lifting height pluggable

Art. No. 63658
Cable set 225 m lifting height pluggable

Art. No. 63701
Sliding door (1

Art. No. 63703
Sliding door (1

Art. No. 63731
Sliding door (1

Art. No. 63875
Sliding door (1

Art. No. 64110
Load platform collapsible (width of 100 cm)

Art. No. 65210
GEDA LIFTLadder 4500 (4

Art. No. 65220
GEDA LIFTLadder 2400 (2

Art. No. 65229
GEDA LIFTLadder 1100 (1

Art. No. 65230
Ladder connector (set)

Art. No. 65310

Art. No. 65320

Art. No. 65330

Art. No. 65364

Art. No. 65410

Art. No. 65420
Battery 24V/10 Ah with capacity indicator

Art. No. 65430
Battery charger 3

Art. No. 65450
Limit rod (limits the driveway downwards)

Art. No. 65470

Art. No. 65520

Art. No. 65530

Art. No. 66007

Art. No. 66100
Initial lubrication set (2 cartridge and 1 brush) Grease for EXTREME applications

Art. No. 66101
Initial lubrication set (2 cartridges and 1 brush) Low temperature grease for MEDIUM and EXTREME applications

Art. No. 66102
Initial lubrication set (2 cartridges and 1 brush) Grease for SIMPLE applications

Art. No. 66115
Base enclosure, 1

Art. No. 66118
Ballast weight complete 2 x 150 kg

Art. No. 66119

Art. No. 66120
Standpipe for landing pre-selection control

Art. No. 66162
Cable bin with trailing cable 25 m lifting height

Art. No. 66163
Cable bin with trailing cable 50 m lifting height

Art. No. 66164
Cable bin with trailing cable 75 m lifting height

Art. No. 66165
Cable bin with trailing cable 100 m lifting height

Art. No. 66514

Art. No. 66515

Art. No. 66517
Hand winch with support (for lifting mast sections during erection)

Art. No. 66602
Special cartridge (400 g) Grease for MEDIUM applications

Art. No. 66603
Special cartridge (400 g) Low temperature grease for MEDIUM and EXTREME applications

Art. No. 67326
Extension cord 5 m for electric module

Art. No. 67600
Spare part boxes GEDA 500 Z/ZP basic set (suitable from serial number 21500-01352) Set consisting of spare part boxes GEDA 500 Z/ZP: - Electric-limit switches (Art

Art. No. 67602
Spare part boxes GEDA 1500 Z/ZP basic set (suitable from serial number 17006-00751) Set consisting of spare part boxes GEDA 1500 Z/ZP: - Electric-limit switches (Art

Art. No. 67702
Spare part box GEDA 500 Z/ZP Extended set electric-switch box (V3) (suitable from serial number 64500-03763)

Art. No. 67705
Spare part box GEDA 500 Z/ZP Extended set electric-switch box (V2) (suitable from serial number 55640-04446)

Art. No. 67708
Spare part box GEDA 1500 Z/ZP Extended set electric-switch box (V3) (suitable from serial number 17024-02126)

Art. No. 67711
Spare part box GEDA 1500 Z/ZP Extended set electric-switch box (V2) (suitable from serial number 17019-02217)

Art. No. 68040
Landing level safety gate „Premium“ 1

Art. No. 68302
Sheet metal panel for landing level safety gate "Comfort"

Art. No. 68310

Art. No. 68320
Sheet metal panel for landing level safety gate "Comfort-Maxi"

Art. No. 70170
Remote control for wireless control of the hoist (suitable for GEDA STAR 250 COMFORT, GEDA MINI 60 S, GEDA MAXI 120 S, GEDA MAXI 150 S, GEDA LIFT 250 COMFORT, GEDA FIXLIFT 250, GEDA 200 Z, GEDA 200 Z COMFORT and GEDA 300 Z)

Art. No. 75023

Art. No. 75024

Art. No. 75062

Art. No. 75712
Limit switch operating plate for landing level stop

Art. No. 75750

Art. No. E020265
Trailing cable guide

Art. No. E020281
Wall brace tube 2

Art. No. E020310
Spindle (foot section/base mast)

Art. No. E020316
Assembly plank (additional) for the load platform C and C-1500 kg (small folding platform to anchor the hoist without existing scaffold)

Art. No. E020320
Door for front loading 1

Use our IoT-Check-Tool to find out which retrofit kit you need for your device: https://central