5 Products for: Building Maintenance Units
GEDA Building Maintenance Units – Maintenance, Cleaning and Safety Made Easy
Whether its glass, concrete or so-called plaster facades – the building’s outer shell must be flawless at all times. It is its flagship and guarantees a perfect first impression, but only if it’s serviced with high-quality machines like building maintenance units (BMUs). As modern architecture started growing in extreme heights, there are only few possibilities left to open windows. Therefore, a specific technique is necessary to clean and maintain extensive glass facades. GEDA’s building maintenance units are the best permanent installation to professionally and safely perform cleaning, assembly and maintenance works on all kinds of facades.
Façade Hoists – Smart Access to all Façade Elements< [...]
Monorail units consist of a 2 m rope suspended working platf [...]
Using gantries, you can clean glass roofs and façades from [...]
Façade ladders allow for vertically and horizontally moving [...]
Four BMU Systems – Four Possibilities
The GEDA building maintenance units are providing lateral, horizontal and vertical access to all levels of the building. Our product range offers the following models:
- Façade lifts
- Maintenance platforms
- Ladder systems
These models differ in:
- Purpose: maintenance, cleaning, safety, inspection, restoration
- Drive: electrical, mechanical
- Additional functions: roppers, telescoping, integration of load winches
Main Purpose at all Times: Cleaning and Maintenance
Modern architecture sets high demands on BMUs. Mobile aerial work platforms, also known as “cherry pickers”, cannot reach the highest stories of new buildings anymore. Also, it is difficult to reach each window due to the modern forms of architecture. Therefore, special lift installations are necessary to enable the workers a safe working environment at every height.
Whereas GEDA facade hoists are used for external cleaning as well as for replacing façade and window elements, gantries are used for glass roofs and glass facades to clean them internal and external.
GEDA cleaning ladders are also permanently installed at the building and enable a vertical and horizontal cleaning of the facades. For the assembly of monorails, rail systems are mounted to reach even difficult areas.
The installations are run mechanically or manually. The cleaning ladder platforms can be moved with a rope winch or electrically with endless winches.
Due to intelligent rail systems, GEDA monorails enable the transportation of cable platforms. Depending on the needs as well as constructional and static requirements, the rails can be produced of steel or aluminum. Just like any other building maintenance unit the drive happens manually or electrically. Potential lifting motions are carried out by an endless winch. Facade hoists, however, can either drive on rails or concrete and can be operated electrically or via rope winch.
All About Building Maintenance Units: Extras and Individual Needs
GEDA offers different additional features for the different kinds of BMUs. Therefore, gantries can be equipped with telescopic ladder systems. Further functions are roppers or the telescoping of outriggers and masts for GEDA façade lifts.
All GEDA building maintenance units are permanent installations that can individually be planned, constructed and produced for any intended purpose. Just contact us via e-mail or telephone and our service team will gladly inform you about the possibilities.